(928) 288-0577

jim@inkjetprinthead.com
Hours of service (Arizona time)
9 AM - Noon; 1:30 PM - 5PM
Free Ground Shipping
On orders over $50
within contiguous US
Printer Friendly Tell a Friend

Canon Printhead for MP990, MP996, MG6120, MG6220, MG6250, MG8120, MG8220

Highlights
Genuine Canon Printhead
Out of Stock!
Price$98.78
Manufacturer CodeQY6-0078-000
Stock Level: 0
ShippingCan ship anywhere
Weight0.5 lb
This is a new, unopened, genuine Canon printhead manufactured in Japan.  Canon does not include ink cartridges with their new print heads.  You can install the ink cartridges from your old print head in the new printhead if they still have ink in them. 

Wondering what causes print heads to go bad?  Usually it is not circuitry failure but simply dried nozzles.  The symptom of dried nozzles is white horizontal lines in the print for one or more colors.  Usually you can print a nozzle check from your printer software which shows a pattern of lines.  If a nozzle is dried, it will show a blank where there should be a line.

Dried nozzles can be caused by several things, including a poorly seated ink cartridge, or lack of use (letting the printer sit for a few weeks without using).

Sometimes print heads can be "resuscitated".  Of course, first start by running several cleaning cycles using your printer's software.  If that doesn't work, try removing the printhead and carefully cleaning the bottom of it with water.  Some of our customers have reported they've been able to get their print head unclogged by soaking the nozzles in Windex. 

Sometimes the printhead problems are caused not by a defective print head but by a “gunky” parking station.  The parking station is the place where the print head “rests” when it is not printing.  Usually it’s on the right side of the printer (looking at the printer from the front).  The parking station has rubber seals that are supposed to surround the printhead when it’s parked.  These seals have two purposes: 1) to keep the printhead from drying out when it is not printing, and 2) to provide a tight seal for strong suction when the printer is self-cleaning the head.  Some printers also have rubber wiper blades that move across the bottom of the printhead to remove accumulated ink.  All these rubber pieces get “gunked” up over time with condensed ink.  This prevents a tight seal, allowing the head to dry out.  The good news: the rubber can be cleaned!  Best tool is a Q-tip dipped in water.  You’ll need several Q-tips. 

For easier access to the parking station, open the cover of the printer so that the print head carriage comes to the middle (as if to replace an ink cartridge).  Unplug power from the printer.  Then use your hand to gently slide the printhead carriage over to the left, so that you can access the parking station (at right) more easily.  When you are finishing cleaning, close the printer, plug power back in, and turn it on.  The printhead will automatically return to the parking station.


(Note: we will not be responsible for any damage to property or persons which result from these instructions.)


Print heads are not returnable. There is a 90 day warranty on Canon printheads.



Average Customer Rating: 5 based on 2 reviews. Write a review.

 
spicerpro
Second purchase for second printer again worked perfectly!
I own two identical Canon PIXMA MG6220 printers. The first one developed a cyan print head problem after 4,600 pages in 2014. This genuine replacement Canon print head solved the problem. My second printer developed a similar problem with the cyan head after 13,650 pages in 2016. Again, this Canon print head solved the problem.

As before, I received an e-mail right away with USPS tracking and the package arrived in a matter of days. Daniel Bartsch at inkjetprinthead.com is a dependable and trustworthy seller. Highly recommended!
 
Spicerpro (Guest)
Genuine replacement works perfectly!
My Canon PIXMA MG6220 developed a print head problem after 4,600 pages. The nozzle check page indicated the cyan head was not printing the second and third bars evenly. Deep cleaning and changing cartridges did not resolve the issue. I have two identical printers, so swapping the heads proved the problem was with the head and not the printer.

I searched the web and found this to be the only supplier in the USA to carry Canon print heads. Before shelling out the money, I was naturally skeptical, but crossed my fingers and ordered a Canon print head designated for MP990/MP996, which also works for the MG6220.

I received e-mails instantly acknowledging my order and providing USPS tracking. In less than a week the package arrived. The new print head came in a Canon box, sealed and airtight. I swapped the bad head with the new one, replaced the cartridges, and printed a nozzle check page. Perfect!

I am a very happy camper. So for all you skeptics, there is no need to have any doubts about this company and their products. This is the real deal and I highly recommend Character Computing.
Your Cart
Your shopping cart is empty!
-->
ViArt Free PHP Shopping Cart